HPE Community
Operating System - Microsoft
1753550 Members
5511 Online
108795 Solutions
New Discussion

Re: HP D1187A Monitor

 
Ivan Stretten
Occasional Contributor

‎09-25-2001 01:11 AM

‎09-25-2001 01:11 AM

HP D1187A Monitor

I have a D1187A monitor connected to an Elite2/True fx video accelorator with a 3Dlabs Glint 500 tx + Glint Delta chip. The monitor is capable of 1280x1024. I can only get a reasonable display when I set the parametes in NT 4 workstation to 1152X870, 32768 colours 75Hz. set on 1280X1024 I get a tripple display, set at 1152X870 the image does not fill the screen, how can I expand this, do I use the contols in the panel on the l/h side, if so how do I do it, ort can I get it to work correctly on 1280X1024
0 Kudos
Reply
1 REPLY 1
Alexander M. Ermes
Honored Contributor

‎09-25-2001 03:57 AM

‎09-25-2001 03:57 AM

Re: HP D1187A Monitor

Hi there.
Are you sure, taht you installed the correct drivers for your vga interface ?
Check your hardware settings pls.
Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.