Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
Operating System - Microsoft
cancel
Showing results for 
Search instead for 
Did you mean: 

Omnibook XE2-DC problems with IRport / Windows2000

SOLVED
Go to solution
Hector_22
Occasional Visitor

Omnibook XE2-DC problems with IRport / Windows2000

I have an Omnibook XE2-DC that originaly had windows 98 and then was migrated to windows 2000, the problem is that it is not possible to connect to throught the IRport while the system says that the device is working properly. Is this IR port working with windows 2000? Is it possible to get an updated driver?
1 REPLY
Roger Faucher
Honored Contributor
Solution

Re: Omnibook XE2-DC problems with IRport / Windows2000

Hector:

Did you upgrade the BIOS before you installed WIN2K? See:

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=19432&locale=en_US&taskId=135&prodTypeId=321957&prodSeriesId=31647&swEnvOID=181

On that same link, click on "HP Configuration Interface for Windows 2000" and read/follow the text. If you didn't install an ACPI BIOS before installing WIN2K, you may have to re-install.

HTH

Make a great day!

Roger
Make a great day!

Roger