Proliant upgrade from Server 2003 to Server 2008

[Jim De Leeuw]

I have a Proliant DL360 G4 that I am trying to complete an inplace upgrade from Windows Server 2003 to Server 2008.

Setup starts fine, but after the reboot it hangs on the Loading screen. I tried Safe Mode and the last driver to load is crcdisk.sys.

Any suggestions how to get past this error?

I have updated all the drivers to PSP 8.25

[Michal Kapalka (mikap)]

hi,

you could try to update it to DPSP 8.30,

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3716247&taskId=135&prodTypeId=18964&prodSeriesId=3716246〈=en&cc=us

mikap

[Steve Violaris]

I have exactly the same problem with a DL380 g4, I have upgraded all drivers to 8.30 and all firmware to 8.60 with no joy. I would be very interested to find a solution. I understand its only a problem with the upgrade and not with a clean install but as this is a certificate authority an in place upgrade would be so much easier :)

[Sergey Chmel]

I had the same problem.
Resolved it by deleting driver lsicsb6.sys from %systemroot%\system32\drivers (needed to boot from win2008 install cd for this)

[RolfGraber]

Thank you very much. Worked for me with a vmware virtualized server.