Operating System - Microsoft
1748109 Members
3966 Online
108758 Solutions
New Discussion юеВ

Re: Vectra QS/16S setup disk

 
Jeremy Kapp
New Member

Vectra QS/16S setup disk

Hello, I still use My Hewlett Packard Vectra QS/16S machine (386)

...but it gives Me the error message "invalid configuration, run setup...and the hard-drive don't work.

Can You please tell Me how I can get a copy of this disk?

This machine is very important to Me...Thank You...Jeremy Kapp

19 REPLIES 19
Jamie Hughes
Honored Contributor

Re: Vectra QS/16S setup disk

Hello,

The Vectra QS was discontinued in 1992 and is no longer supported. I found what I believe to be the setup/BIOS disk for the QS/20 and that should work for your machine. If you want to post your email address, I will send it to you. There are no guarantees that this will work and it is not supported by HP so you will have to use it at your own risk. Please let me know if you want the file and what email address to send it to.

Best regards,
Jamie Hughes
Jeremy Kapp
New Member

Re: Vectra QS/16S setup disk

Yes Please, I would love a copy of this disk.

My email is **personal info erased**

...any more info You can give Me on this old computer would be greatly appreciated...Thanks...Jeremy Kapp

MEYER_1
New Member

Re: Vectra QS/16S setup disk

Hello,

I have got the same problem with my Vectra QS 16S PC, can someone help me....
I know that it's an old PC, but I need it.
The message that I have show me:
"invalid configuration, run setup"

My email address is:
**Personal info erased**

Sebastien
Kent Ballance
New Member

Re: Vectra QS/16S setup disk

Me too! I need a Vectra QS/16S setup disk. Please email me at kent.ballance at bdk.com
Sumit_9
New Member

Re: Vectra QS/16S setup disk

i am having the same problem...
did anyone find a solution to this?
John Erickson_2
New Member

Re: Vectra QS/16S setup disk

I also need a copy of the set up disk for a QS/20 for a piece of manufacturing equipment.
thx.
John Erickson_2
New Member

Re: Vectra QS/16S setup disk

e-mail is **personal info erased**

Uwe Wagner
New Member

Re: Vectra QS/16S setup disk

Hi

I am also searching for a setup/bios-disk for a qs16/s(386/16Mhz). Maybe someone can send me the software on it to my email-adress???

looking forward to a solution of my problem

Uwe
Uwe Wagner
New Member

Re: Vectra QS/16S setup disk

Hi here
Its Uwe again

I forgot my email: **personal info erased**
regards

Uwe