Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Operating System - Microsoft
cancel
Showing results for 
Search instead for 
Did you mean: 

Win 2000 Driver availability 7200i and 6100c

Paul Thomas_10
Occasional Visitor

Win 2000 Driver availability 7200i and 6100c

Hi,

I am fond of both of these HP products, however I am unable to use them due to
lack of a Win 2000 driver. Please advise as to how soon one will be made
available. I have already subscribed to notification options. Thanks...
3 REPLIES
Derek Rosen
Occasional Visitor

Re: Win 2000 Driver availability 7200i and 6100c

Paul,

According to HP's Website, the driver(Windows 2000 version)for your 7200 series is available at the following URL: http://www.hp.com/cposupport/information_storage/support_doc/lpg40837.html
Unfortunately, there is no Win2K driver for your 6200c.
Share your Knowledge. It's a way to achieve immortality.
Jamie Hughes
Honored Contributor

Re: Win 2000 Driver availability 7200i and 6100c

Hi Paul,

The info you need for your 6100C Scanner can be found at this URL:

http://www.hp.com/cposupport/scanners/support_doc/bps02713.html
Jamie Hughes
Honored Contributor

Re: Win 2000 Driver availability 7200i and 6100c

Hi Paul,

I found another page on the 6100C that might be helpful:

http://www.hp.com/cposupport/scanners/support_doc/bps03528.html

Note that "some" models of the 6100C shipped with a rectangular or triangular shaped SCSI cards and those will need to be replaced. There is a link in that paragraph that you can use to get a discount on a new SCSI from AdvanSys. You shouldn't need to update any drivers or firmware though, but you might need a new SCSI card. Just read thru all the info on the page. I hope that helps.

Best regards,
Jamie Hughes