Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Operating System - Microsoft
Showing results for 
Search instead for 
Did you mean: 

WinPE 2005 with DL320 G3 and DL320 G4

WinPE 2005 with DL320 G3 and DL320 G4

We are attempting to setup a WinPE environment that will support both the DL320 G3 and G4 platforms with SATA RAID enabled.

A generic WinPE build (with no additions to winpeoem.sif) detects the drives appropriately for the DL320 G3. However, the DL320 G4 drives are not recognized.

The subsequent addition of the DL320 G4 drivers ( in the Section marked OEMDriversParams (with OEMDriversDirs=adpahci) results in the DL320 G4 drives being seen, but not the drives on the DL320 G3.

Any assistance or suggestions would be appreciated. Microsoft has indicated that there is probably a conflict and that we should go back to the vendor (HP).

Regards - Ziggy