Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
cancel
Showing results for 
Search instead for 
Did you mean: 

image

Mahesh1
Frequent Advisor

image

Hi,
We have one server with os and applications .We need to take an image of that server and we need to restore the same in different server with os and applications.Please tell me how to do this.

Regards
Mahesh Gowda
2 REPLIES
Vibhor Kumar Agarwal
Esteemed Contributor

Re: image

There are some Ghost softwares available which copy the whole image.

But for this the other system should be of some configuration.
Vibhor Kumar Agarwal
Chris Berwald
Frequent Advisor

Re: image

Exactly. You can get a program from Norton called Norton Ghost. This will allow you to make a image of one computer and it will allow you to transfer that image to another computer through a direct connection (ie 2 drives in one computer) and by a network. I have used this program many times and have not had any problems with it. Just make sure the computer you copy the new image to has about the same specs as the original computer you made the image from (don't copy a server image to an old pentium 1 system). Good luck with you imaging!