Advanced Server V7.3A for OpenVMS

[Henrik Holmberg]

I have made an upgrade from v6.1 and now i cant connect to the shares using tcpip.

I get this error in the PWRK$KNBDAEMON log file :
Fri Feb 25 11:09:31 2005 get_phys_addr: PWRK$KNBDAEMON_DEVICE is set to EIA0:

Fri Feb 25 11:09:31 2005 get_phys_addr: EIA2: PH Address: AA-00-04-00-01-04

Fri Feb 25 11:09:31 2005 get_ip_addr: PWRK$KNBDAEMON_IPADDR is 172.25.1.1

Fri Feb 25 11:09:31 2005 IP Address: 172.25.1.1

Fri Feb 25 11:09:31 2005 NBNS IP Address: 172.25.1.250

Fri Feb 25 11:09:31 2005 ip_brdcst_address : 172.25.1.255

Fri Feb 25 11:09:31 2005 bind_a_port(139): t_bind failed: 8

Fri Feb 25 11:09:31 2005 Port binding failed


My interface in tcpip is setup as :
Interface: IE0
IP_Addr: 172.25.1.1 NETWRK: 255.255.255.0

[Karl Rohwedder]

Henrik,

you rebootet your system and ran PWRK$CONFIG?

The TCPIP$PWIP_ACP is loaded?

mfg Kalle

[Henrik Holmberg]

Yes - all config has been made.

[Karl Rohwedder · Accepted solution]

Is another application using port 139?

Do you habe multiple ethernet interfaces and is the PWRK$KNBDAEMON_DEVICE logical defined?

Pls.- see the chapter 3.11 of the AdvancedServer Installation and configuration manual:

http://h71000.www7.hp.com/doc/73final/6555/6555pro.pdf

mfg Kalle

[Antoniov.]

Henrik,
AS7.3 has a patch to install. Did you install all the patch?

Antonio Vigliotti

[Antoniov.]

Here you can find the latest patch of AS
http://www5.itrc.hp.com/service/patch/patchDetail.do?BC=patch.breadcrumb.main|patch.breadcrumb.search|&patchid=ADVANCSERV-V0703-A4&context=openvms:alpha:7.3-2

Antonio Vigliotti

[Henrik Holmberg]

I had no problems prior to the upgrade and ther was not installed other programs (other than openvms 7.3-2 and as7.3a3)

I have the logicals :
"PWRK$KNBDAEMON_DEVICE" = "EIA0:"
"PWRK$KNBDAEMON_IPADDR" = "172.25.1.1"

I am running on a alpha ds20 with 1 nic.

It is working if i use netbeui but not on ip.

I have made no changes to the network setup.

[Antoniov.]

Have you Multinet? AS V7.3A4 (Latest patch) solved a trouble with KNBDAEMON and multinet.
Because you migrated form V6.1, did you update licenses?

Antonio Vigliotti

[Henrik Holmberg]

The license has been upgraded to pwlmxxx07.03.
I have some as server based and som as client based.

If You mean more than one ip when writing about multinet, then no.

The problem starts during load of the knbdaemon with the 'Port binding failed
'

I will try to upgrade to 7.3a4 to see if it solves my problem.

Thanks for all the ideas.

[Henrik Holmberg]

After an upgrade to adv.server 7.3-a4 my problem is solved.

Thanks to all