HPE Community
Operating System - OpenVMS
1752794 Members
5933 Online
108789 Solutions
New Discussion

Re: Advanced Server fails to start on TCP/IP

 
Jeremy Begg
Trusted Contributor

‎04-07-2006 12:20 PM

‎04-07-2006 12:20 PM

Re: Advanced Server fails to start on TCP/IP

I followed through all of your suggestions without much success, so in the end I was able to log a support call with HP.

Turned out that whoever configured this system (it wasn't me!) had configured both ethernet ports with the same IP address, but TCP/IP services was enabling only one port. The result was that TCPIP$INET_* logicals were not being defined.

After removing the second IP interface definition (for the unused ethernet port) and rebooting, Advanced Server started working.

Thanks to all.
0 Kudos
Jeremy Begg
Trusted Contributor

‎04-07-2006 12:21 PM

‎04-07-2006 12:21 PM

Re: Advanced Server fails to start on TCP/IP

See above.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.