HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

Appmid System Management Agent

 
rAMIRO_2
Occasional Contributor

Appmid System Management Agent

Hello.

I have the Appmind agent for OpenVms integrated with OpenView console operations. Can somebody tell me how can I obtain hardware problems reported by operator.log or something like that? In Appmind I use console configuration, and also logfile control (operator.log) but I'm not an administrator and I don't know what strings search to obtain hardware problems that I've in my installation.

Thanks and regards everybody.
2 REPLIES
Wim Van den Wyngaert
Honored Contributor

Re: Appmid System Management Agent

This is how I do report hardware problems on my systems.

I monitor errors in general (show error).

When an errors occurs, I use the appropriate software to analyse the error (ca on GS160, diag on all others).

I scan all the messages for things I know are harmless. If any messages are left, an alarm is given and manual interaction is needed.

I also use snmp dumps to monitor hardware such as hubs and sanswitches and I monitor all shadow set changes.

Wim
Wim
Wim Van den Wyngaert
Honored Contributor

Re: Appmid System Management Agent

Forgot to mention that I monitor batteries, spare disks and failed disks of disk controllers by doing set ho/scsi.

Wim
Wim