1745817 Members
4244 Online
108722 Solutions
New Discussion юеВ

Re: BMC

 
SOLVED
Go to solution
Volker Halle
Honored Contributor
Solution

Re: BMC

Lori,

which device do you have configured for the active console output, input and error device ? I believe I first had the

Acpi(PNP0501,0)/Uart(9600 N81)/VenMsg(Vt100)

entry selected (with serial cable connected to Serial A port), then later switched to the

Acpi(HWP0002,700)/Pci(1|1)/Uart(9600 N81)/VenMsg(Vt100+)

entry to have the OpenVMS console connected to the MP port.

Volker.
Lori_33
Occasional Advisor

Re: BMC

Hi Volker,

Thank you! That was the issue, I had my console input/output directed to the MP port, once I redirected to the on board serial port, I was able to go to EFI. thank you!!
Lori_33
Occasional Advisor

Re: BMC

thank you to all who replied!!