Batch script for HSJ controllers?

[JerryK]

Is there a way to extract information from HSJ controllers, such as SHOW DISKS, in batch mode? I found a reference to HSDSA_SCRIPT but not how to obtain it.

[Steven Schweda]

Google suggests that HSDSA-SCRIPT-ALPHA.EXE
and HSDSA-SCRIPT-VAX.EXE (each a "Utility to
collect HSJ/HSD information [...]") are part
of "the RCM Service Tool". Further,

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=RCMBASE01

I also hear that "RCM is also part of the
WEBES Kit", which seems to be available on
the "Compaq System Tools CD-ROM", one of
which (dated September 2001) I seem to have.
Also,

http://h18000.www1.hp.com/support/svctools/

Of course, I know nothing, so I can't say if
any of this stuff will do what you want.

[Lokesh_2]

Hi Jerry,

Yes, the above script as mentioned by Steven, can be used to obtain information about HSJ controllers from batch mode. We use these scripts for the same purpose.

Best regards,
Lokesh

[JKrucus]

I cannot find this on the System Tools CD or in any Freeware abstract. Does anyone know where/how to obtain this?

[Jim_McKinney · Accepted solution]

See... http://www.djesys.com/freeware/vms/ where David Dachtera has generously hosted some of the old VMS freeware.

[Steven Schweda]

The System Event Analyzer User Guide in
WEBES 4.4.3 says about RCM:

Revision and Configuration Management. In
versions prior to 4.2, RCM was a WEBES
component that collected configuration,
revision, and patch data from supported
systems.

Following the "RCM" link from:

http://h18000.www1.hp.com/support/svctools/

there's also:

http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=RCMBASE01

which page has a "Receive for Free >>"
button.

[JerryK]

I found it on the ftp site.