HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

Configuring Multiple Default Gateways.

 
Frankv_1
Occasional Visitor

Configuring Multiple Default Gateways.

Hi all. I need some help configuring multiple default gateways on an Alpha system (Digital 500au ~ running VMS V7.1-2). The system is setup as a dual redundant system ... each Host server has 2 network cards. Each LAN card is directly connected to dedicated interfaces within a router for one HOST server and the same setup for another router and HOST server.

Can someone please point me to some technical documents please. I've been reading on-line for a while.

Thanks, Frank
2 REPLIES
Kumar_Sanjay
Regular Advisor

Re: Configuring Multiple Default Gateways.

http://h71000.www7.hp.com/doc/tcpip54.html

I guess you are using TCPIP 5.4
Wim Van den Wyngaert
Honored Contributor

Re: Configuring Multiple Default Gateways.

http://h71000.www7.hp.com/doc/732final/6526/6526pro_004.html#route_chap is more precise. But 7.1-2 will be a lower version of tcpip I guess.

I would try 2 default routes (for 0.0.0.0). I think it will attach the routes correctly.

We have a GS160 cluster with a common routing db and here each nodes "picks" his own default route correctly (tcp 5.3).

>ucx sho rout/perm

PERMANENT

Type Destination Gateway

PN 0.0.0.0 128.231.63.240
PN 0.0.0.0 128.231.160.240
Wim
Wim