Operating System - OpenVMS
1748031 Members
5044 Online
108757 Solutions
New Discussion юеВ

Re: DECWindows Unable to start.

 
Louann Duchemin
Regular Advisor

DECWindows Unable to start.

Reviewing the DECW$SERVER_0_ERROR.LOG, I noticed the following message.

Can I get an explaination on what this means:

Unable to audit successful connection, status = 292c
4 REPLIES 4
Karl Rohwedder
Honored Contributor

Re: DECWindows Unable to start.

292c:

%SYSTEM-F_NOAUDIT, operation requires AUDIT privilege.

Perhaps you can provide some more information:
- doesn't it start on the graphics console
- or can't you start a remote DEC-application
- are all SYSGEN paraeter set acc. to the docs
- did it run before

regards Kalle
Louann Duchemin
Regular Advisor

Re: DECWindows Unable to start.

Everything was in working order. User originally tried to login using the system account but as the user started tying the password, "USER AUTHORIZATION FAILURE" and next line gets "[26~ "and then screen goes back to user name prompt.

I tried to restart DECWindows with the restart command, and now user stats the screen has gone blank. User can not tell if the keyboard is working. The user can login to the node remotely just fine.

This is a DS10 connected to a KVM switch, using a pull out screen,keboard and mouse combination.
Karl Rohwedder
Honored Contributor

Re: DECWindows Unable to start.

Could you pls. attach the complete DECW$SERVER...LOG?

Kalle
Louann Duchemin
Regular Advisor

Re: DECWindows Unable to start.

Closing.