Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

Data Access Protocol error detected; DAP code = 00019008

 
SOLVED
Go to solution
Hoff
Honored Contributor

Re: Data Access Protocol error detected; DAP code = 00019008

>If I supplant their network switch with my own, I think I can guess what would get supplanted next ;-)

Why, the networking team, of course.

> I will get them to setup two other ports on another switch as a step in trying to resolve this.

Work with your boss here, too.
Art Wiens
Respected Contributor

Re: Data Access Protocol error detected; DAP code = 00019008

FYI's, on Sunday I moved the two systems to a completely different Cisco 3750 switch with different ethernet cables and the problem has just reoccured.

I have logged another call with HP.

Cheers,
Art
Volker Halle
Honored Contributor

Re: Data Access Protocol error detected; DAP code = 00019008

Art,

as you seem to have a non-intrusive method to reproduce/show this problem (with DIR node::), why not run a couple of batch jobs from different nodes and/or between these 2 doing DIR node:: in a loop and watching the number of failures and recording a failure matrix: how may failures between which pairs of nodes ? One would hope, that this should point to some common path ...

Volker.
Highlighted
Volker Halle
Honored Contributor

Re: Data Access Protocol error detected; DAP code = 00019008

Art,

did you try to provoke the error by using NCP LOOP NODE WITH {mixed,ones,zeros} ? Or with NCP LOOP CIRCUIT ?

Volker.