Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

EVA3000: Active Vdisk not seen into the presented host

 
rye_1
Occasional Visitor

EVA3000: Active Vdisk not seen into the presented host

hello,

am currently having problem seeing the presented vdisk physically into our servers. it used to be a local drive into my server, but for unknown reason that drive was lost. am attaching a screenshot of the presentations i've made but, as said, this is not viewable nor accessible into the physical server that these hosts represents.

any assistance is highly appreciated.

thank you,
rye
3 REPLIES
P Muralidhar Kini
Honored Contributor

Re: EVA3000: Active Vdisk not seen into the presented host

Hi,

In case you have not already seen, Check the following link for a discussion
on a similar topic -
http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1273822957069+28353475&threadId=824917

Regards,
Murali
Let There Be Rock - AC/DC
rye_1
Occasional Visitor

Re: EVA3000: Active Vdisk not seen into the presented host

hi muralli,

thanks for the link. will check this thread asap and let you know if there will be other concerns than this.

regards,
rye
Shriniketan Bhagwat
Trusted Contributor

Re: EVA3000: Active Vdisk not seen into the presented host

Hi,

After creating the VDISK, did you execute the MC SYSMAN IO AUTO on VMS server? This command automatically identifies and configures all hardware devices attached to a system by connecting devices and loading their drivers. Does VMS server and EVA are in same zone? You can view the EVA from the SDA command fc show wtid.

Regards,
Ketan