Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

I need help setting up a vax (VMS V7.1) to a network

 
SOLVED
Go to solution
Ed_126
Occasional Advisor

I need help setting up a vax (VMS V7.1) to a network

I do have ftp on the vax but I im very much in the dark and can't find a person in the ST. Louis MO area to help. Any Ideas?
9 REPLIES
Ian Miller.
Honored Contributor

Re: I need help setting up a vax (VMS V7.1) to a network

what sort of tcpip software do you have on this VAX?
____________________
Purely Personal Opinion
Antoniov.
Honored Contributor
Solution

Re: I need help setting up a vax (VMS V7.1) to a network

You could start investigation typing
$ UCX SHO SERVICE FTP

Antonio Vigliotti
Antonio Maria Vigliotti
Ed_126
Occasional Advisor

Re: I need help setting up a vax (VMS V7.1) to a network

I will try
$ UCX SHO SERVICE FTP
and get back to you with results
Dale A. Marcy
Trusted Contributor

Re: I need help setting up a vax (VMS V7.1) to a network

If that command fails, you can see if you have multinet by typing:

$ multinet show/version

If you have multinet for TCP/IP stack this will return the version information.
Ed_126
Occasional Advisor

Re: I need help setting up a vax (VMS V7.1) to a network

got right it! thanks
Martin P.J. Zinser
Honored Contributor

Re: I need help setting up a vax (VMS V7.1) to a network

Helo Ed,

in case you do have UCX, the easiest way to configure the box is to execute

@sys$manager:ucx$config.com

which opens a menu with various options for you. The basic setup is done with 1 Core environment.

You do need IP address, subnet mask etc. to complete this task. What else you want to configure really depends on your local setup.

If you have further questions feel free to ask ;-)

Greetings, Martin
Ed_126
Occasional Advisor

Re: I need help setting up a vax (VMS V7.1) to a network

Thanks for all of the great info. It was so much easier then I thought it would be but this forum gave me the confdence to start!
I will be back!
Jan van den Ende
Honored Contributor

Re: I need help setting up a vax (VMS V7.1) to a network

Ed,

Obviously from your last post, you have been well helped by various people, and it is good forum practise to show your appriciation.

Since you are new to this forum, may a point you to

http://forums1.itrc.hp.com/service/forums/helptips.do?#28

(you have to repair the wrap!)

Thanks.
Jan
Don't rust yours pelled jacker to fine doll missed aches.
Antoniov.
Honored Contributor

Re: I need help setting up a vax (VMS V7.1) to a network

Ed,
welcome to vms world.
You can inquire, here someone always answer you ;-)

Antonio Vigliotti
Antonio Maria Vigliotti