cancel
Showing results for 
Search instead for 
Did you mean: 

INTRUSION

SOLVED
Go to solution
John Geilow_1
Occasional Advisor

INTRUSION

Does anyone know how to set the INTRUSION
limit?

John Geilow
5 REPLIES
Wim Van den Wyngaert
Honored Contributor
Solution

Re: INTRUSION

John,

Check this :
http://www2.hmc.edu/www_common/ovms073/v73/6346/6346pro_017.html#index_x_1424

but what do you mean with "limit" ?

Wim
Wim
Volker Halle
Honored Contributor

Re: INTRUSION

John,

the LGI system parameters control the behaviour of intrusion detection.

$ MC SYSGEN
SYSGEN> SHOW /LGI
SYSGEN> HELP sys_p lgi

The OpenVMS Guide to System Security explains all the details:

http://h71000.www7.hp.com/doc/732FINAL/aa-q2hlg-te/aa-q2hlg-te.HTMl

See chapter: Understanding the Intrusion Database

Volker.
John Geilow_1
Occasional Advisor

Re: INTRUSION

The limit i was referance was how many failure are there before a lock occur?
Wim Van den Wyngaert
Honored Contributor

Re: INTRUSION

In that case you need to increase LGI_BRK_LIM. I always increase it to 5 - 10 because users often need some trials before they remember their passwords.

Wim
Wim
John Geilow_1
Occasional Advisor

Re: INTRUSION

Thanks for the help