KZPDC and serial console

[John Welsh_2]

Hi gang,
Many moons ago, (I think in 2004 ), I configured
a Smartarray 5300A on an ES40 SRM with a serial
VT520 console. Problem is I can't remember
the escape sequences to get started.
I have searched HP but can't find any
reference. Can anyone help on this ?
Thanks.

[Duncan Morris]

John,

are you looking for

>>> run bios pya0

or more info?

Here is a link to the configuration info

ftp://15.200.2.21/ftp1/pub/alphaserver/storage/controllers/sa6400a/EK-SA530-INE01.PDF

Duncan

[John Welsh_2]

Hi Duncan,
Thanks for your input but no I have to
use a VT520 serial console on the Alpha.
The functionality is similar to the old
ra200srl program that was used to configure
the original DAC SWXCR on an Alpha
using a dumb serial console.
I have done it before but didn't make
a note of the Escape sequences at the
time.
Regards, JohnW.

[Duncan Morris · Accepted solution]

John,

have a look at this thread where Antonio gives the escape sequences in his last response

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1203435

Duncan

[John Welsh_2]

Great.
Exactly what I was looking for.
I can now check the status of
the configured volumes.
Thanks Duncan.