HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

KZPDC and serial console

 
SOLVED
Go to solution
John Welsh_2
Regular Advisor

KZPDC and serial console

Hi gang,
Many moons ago, (I think in 2004 ), I configured
a Smartarray 5300A on an ES40 SRM with a serial
VT520 console. Problem is I can't remember
the escape sequences to get started.
I have searched HP but can't find any
reference. Can anyone help on this ?
Thanks.
4 REPLIES
Duncan Morris
Honored Contributor

Re: KZPDC and serial console

John,

are you looking for

>>> run bios pya0

or more info?

Here is a link to the configuration info

ftp://15.200.2.21/ftp1/pub/alphaserver/storage/controllers/sa6400a/EK-SA530-INE01.PDF

Duncan
John Welsh_2
Regular Advisor

Re: KZPDC and serial console

Hi Duncan,
Thanks for your input but no I have to
use a VT520 serial console on the Alpha.
The functionality is similar to the old
ra200srl program that was used to configure
the original DAC SWXCR on an Alpha
using a dumb serial console.
I have done it before but didn't make
a note of the Escape sequences at the
time.
Regards, JohnW.
Duncan Morris
Honored Contributor
Solution

Re: KZPDC and serial console

John,

have a look at this thread where Antonio gives the escape sequences in his last response

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1203435

Duncan
John Welsh_2
Regular Advisor

Re: KZPDC and serial console

Great.
Exactly what I was looking for.
I can now check the status of
the configured volumes.
Thanks Duncan.