HPE Community
Operating System - OpenVMS
1752311 Members
5647 Online
108786 Solutions
New Discussion юеВ

LAN Failover

 
SOLVED
Go to solution
Peter Zeiszler
Trusted Contributor

тАО05-22-2007 09:05 AM

тАО05-22-2007 09:05 AM

LAN Failover

I find documentation for failsafe IP. Where do I find documentation concerning LAN failover as referenced elsewhere on these forums?

Does it work fine with Decnet Phase IV?
0 Kudos
2 REPLIES 2
Andy Bustamante
Honored Contributor

тАО05-22-2007 09:13 AM

тАО05-22-2007 09:13 AM

Solution

Re: LAN Failover

See chapter 10, System Manager's Manual Vol 2 http://h71000.www7.hp.com/doc/82FINAL/aa-pv5nj-tk/aa-pv5nj-tk.HTMl.

LAN failover works very well with DECnet phase IV, Availability Manger, TCPIP, LAT, MOP, . . .

Make sure to pay attention to supported NICs. Support for DE-500s was added in an ECO for 7.3-2.

Andy
If you don't have time to do it right, when will you have time to do it over? Reach me at first_name + "." + last_name at sysmanager net
0 Kudos
Peter Zeiszler
Trusted Contributor

тАО05-22-2007 10:37 AM

тАО05-22-2007 10:37 AM

Re: LAN Failover

Thanks - we just upgraded to 7.3-2. But I am looking at deploying some new itaniums on 8.3 so was looking into best redundancy.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.