HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

LAN Failover

 
SOLVED
Go to solution
Peter Zeiszler
Trusted Contributor

LAN Failover

I find documentation for failsafe IP. Where do I find documentation concerning LAN failover as referenced elsewhere on these forums?

Does it work fine with Decnet Phase IV?
2 REPLIES
Andy Bustamante
Honored Contributor
Solution

Re: LAN Failover

See chapter 10, System Manager's Manual Vol 2 http://h71000.www7.hp.com/doc/82FINAL/aa-pv5nj-tk/aa-pv5nj-tk.HTMl.

LAN failover works very well with DECnet phase IV, Availability Manger, TCPIP, LAT, MOP, . . .

Make sure to pay attention to supported NICs. Support for DE-500s was added in an ECO for 7.3-2.

Andy
If you don't have time to do it right, when will you have time to do it over? Reach me at first_name + "." + last_name at sysmanager net
Peter Zeiszler
Trusted Contributor

Re: LAN Failover

Thanks - we just upgraded to 7.3-2. But I am looking at deploying some new itaniums on 8.3 so was looking into best redundancy.