MOP directory empty... :-(

[Didier Morandi_2]

step (not) forward unwound.

DTL01> lancp show node DTL02

Node Listing, volatile database:
DTL02 (00-00-F8-76-37-C2):
MOP DLL: Load file: APB.EXE
Load root: DISK$ALPHA0731:
Boot type: Alpha satellite

DTL01> dir DISK$ALPHA0731:

Directory DISK$ALPHA0731:

DIA$TOOLS.DIR;1 1/3 30-OCT-2003 16:07:27.26
MOM$SYSTEM.DIR;1 1/3 30-OCT-2003 16:07:27.53
SYS$I18N.DIR;1 1/3 30-OCT-2003 16:07:27.66
SYS$LDR.DIR;1 1/3 30-OCT-2003 16:07:28.05
SYS$STARTUP.DIR;1 1/3 30-OCT-2003 16:07:28.18
SYSCBI.DIR;1 1/3 30-OCT-2003 16:07:28.33
SYSCOMMON.DIR;1 4/6 17-NOV-2003 13:09:40.69
SYSERR.DIR;1 1/3 30-OCT-2003 16:07:29.82
SYSEXE.DIR;1 1/3 30-OCT-2003 16:07:29.95
SYSHLP.DIR;1 1/3 30-OCT-2003 16:07:29.00
SYSLIB.DIR;1 1/3 30-OCT-2003 16:07:28.47
SYSMAINT.DIR;1 1/3 30-OCT-2003 16:07:28.76
SYSMGR.DIR;1 1/3 30-OCT-2003 16:07:28.88
SYSMSG.DIR;1 1/3 30-OCT-2003 16:07:29.67
SYSTEST.DIR;1 1/3 30-OCT-2003 16:07:28.62
SYSUPD.DIR;1 1/3 30-OCT-2003 16:07:29.54
TNT.DIR;1 1/3 30-OCT-2003 16:07:30.09

D.

I had to change my system time as my licenses do not work when in cluser mode (see previous post, not solved).

[Didier Morandi_2]

DTL01> lancp sh dll

LAN MOP DLL Status:
EWA0 enabled in selective mode for all requests, data size 246 bytes

#Loads Packets Bytes Last load time Last loaded
------ ------- ----- -------------------- -----------------
EWA0 2 8123 1038970 30-OCT-2003 15:19:10 DTL02

I shutdowned (sp?) both systems, rebooted with the autogen line I forgot to use when swapping from DECnet boot to LAN :-( then removed the boot_file and now the DTL02 is up and running, building its page and swap files...

I owe you all plenty of beers...

Which disk can be used for paging and swapping? DTL02$DKA0:
May this procedure INITIALIZE DTL02$DKA0 [Y]?
This procedure will initialize the disk, DTL02$DKA0.
Are you satisfied with the BACKUP of DTL02$DKA0 [N]? y
Initializing DTL02$DKA0...
%CREATE-I-CREATED, DTL02$DKA0: created
%SYSGEN-I-CREATED, DTL02$DKA0:PAGEFILE.SYS;1 created
%SYSGEN-I-CREATED, DTL02$DKA0:SWAPFILE.SYS;1 created
etc...


Bye for now, I have to post another tricky question :-)

Many thanks again.

D.

[Joseph Huber_1]

Somehow the VMS/LANACP/APB versions do not agree.
My VMS 7.3-1 system has
MOP V4 format, System image, ..., not MOP V3.
My ECO level is VMS731_LAN-V1300, and VMS731_UPDATE-V0500. maybe in between there is Your problem.
Many of the LAN ECOs brought new APB.EXE files, some of the ECOs before LAN-V1000 introduced APB errors, corrected in later ECOs.

[Didier Morandi_2]

All is fine now, many thanks to all.
Thread closed.

D.