NTP Client configuration

[Taulant Shamo]

The product installed are:

SCCRA1$ PROD SHOW PROD
----------------------------------- ----------- ------------
PRODUCT KIT TYPE STATE
----------------------------------- ----------- ------------
DEC AXPVMS DECNET_OSI V7.2-1 Full LP Installed
DEC AXPVMS OPENVMS V7.2-1 Platform Installed
DEC AXPVMS VMS V7.2-1 Oper System Installed
DEC AXPVMS WEBES V4.0-7 Platform Installed
----------------------------------- ----------- ------------

4 items found

TCPIP is not installed.

SCCRA1$ UCX SHOW SERV NTP /FULL
%DCL-W-IVVERB, unrecognized command verb - check validity and spelling
\UCX\

UCX is not installed too

[Taulant Shamo]

How can in install TCPIP software?
Is needed the server restart after installation?

Can this installation have an impact in syatem, because the4 system is live.

[Antoniov.]

Taulant,
you have not got tcp/ip suite installed.
No tcp/ip, no NTP!
Is there some reason of tcp/ip are not installed? You have V7.2 and tcp/ip is include in this version of software.

Antonio Vigliotti

[Taulant Shamo]

The reason why tcpip suite is not installed I don't know. In my other system which is new tcpip suite is installed and ntp is configured properly. this system in older and may be tcpip was not needed before.

my other system has it:
BEP1-> PROD SHOW PROD
----------------------------------- ----------- ------------
PRODUCT KIT TYPE STATE
----------------------------------- ----------- ------------
COMPAQ AXPVMS FMKCTF V3.0 Full LP Installed
COMPAQ AXPVMS FMKLIC V1.2 Full LP Installed
COMPAQ AXPVMS FMKTBX V3.0 Full LP Installed
COMPAQ AXPVMS IN7_CCITT V4.1-5 Full LP InsDependErr
CPQ AXPVMS CDSA V1.0-2 Full LP Installed
DEC AXPVMS DECNET_OSI V7.3-1 Full LP Installed
DEC AXPVMS FTAM V3.2-O Full LP Installed
DEC AXPVMS OPENVMS V7.3-1 Platform Installed
DEC AXPVMS OSAK V3.0-R Full LP Installed
DEC AXPVMS TCPIP V5.3-18 Full LP Installed
DEC AXPVMS VMS V7.3-1 Oper System Installed
DEC AXPVMS VT V2.1-J Full LP Installed
DEC AXPVMS WANDD V1.6-1 Full LP Installed
DEC AXPVMS X25 V1.6-1 Full LP Installed

[Antoniov.]

Hi,
the other older system appears to be newest software installed. Older has V7.3-1 while newest has V7.2-1.
I think you have to install tcp/ip; AFAIK there are no reason to avoid this software. However it best you ask for a while why tcp/ip is not present. May be this machine must be isolated by other hosts?

Antonio Vigliotti

[Taulant Shamo]

How to install tcp/ip.
Has any impact in communicationj with other sytems.

[Ian Miller.]

The TCPIP kit can be found on the VMS CDs.

It will be in a directory with TCPIP in the name.

Current versions of TCPIP install with PCSI so there should be *TCPIP*.PCSI on a CD file which you install with

PRODUCT INSTALL TCPIP/SOURCE=dev:[dir]

where dev:[dir] is the location of the kit.

You do do need a licence for this product. Look for a TCPIP licence or a NAS licence in the result of SHOW LICENSE command.

The TCPIP product can run concurrently with DECnet but not concurrently with other vendors TCP/IP products.

[Antoniov.]

Taulant,
my check list is:
a) Are you network administrator? If no, you have to ask for a tcp/ip address to assign to your host.
b) Have you enough memory? You need approx 150,000 blocks on HD; I don't forget how many RAM, it's better 256 Mb at minimun.
c) Have license loaded? TCP/IP is included in VMS; however if I remember you need of PAK.
d) Have you CD? TCP/IP is on VMS distribution media or else on Layered Products Distribution media.
e) What version of TCP/IP you can install? At now I don't remember. For V7.2 may be V5.3; I have to search for exact answer.
d) How install TCP/IP? Using PRODUCT INSTALL command.
f) Other question? You can read TCP/IP Software Product Description
http://h18000.www1.hp.com/info/SP4646/SP4646PF.PDF
and TCP/IP installation guide
http://h71000.www7.hp.com/doc/82FINAL/6524/6524pro.HTML

Antonio Vigliotti

[Andy Bustamante]

I'm curious that you have ntpq available but don't have HP's TCPIP or UCCX installed.

Do either of either these commands list a file?

$ DIR SYS$SYSROOT:[MULTINET]START_MULTINET.COM
or
$ DIR SYS$SYSROOT:[TCPWARE]TCPWARE_LOGICALS.COM

There are other TCPIP stacks besides the default HP TCPIP product. If you an ntpq command available I suspect you're running one of the third party IP stacks.


Andy

[Taulant Shamo]

Only this file exist:

TCPWARE_LOGICALS.COM;1


The system use tcpware