HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

New HP printer CP5525 not supported

 
Duncan McRae
Occasional Visitor

New HP printer CP5525 not supported

When can I expect a new version of DCPS? We are running version 2.7. We have new HP CP5525 color printers. When trying to print the these, we get %DCPS-I-USERDATA, %%[ ReturnStatus: 275 "HP Color LaserJet CP5520 Series" then the print job stalls. The display on the printer shows "Print data has been received that may not be complete."
2 REPLIES
Rajesh Babu Boyalla
Occasional Contributor

Re: New HP printer CP5525 not supported

Hi Duncan,

>>When can I expect a new version of DCPS?
New version of DCPS release is not planned yet and Engineering is currently evaluating the timelines for the same.

And for the problem seen with HP Color LaserJet CP5520 Series printers, Engineering suspects that there may be some communication issue between the printer and DCPS which is making the queue to stall.
Hence as a workaround, Engineering would like to suggest the customer to use an LPD queue instead of RAW_TCPIP and define a PRODUCT_NAME logical to HPGENERIC which could work successfully.


Below is the command to define the logical :

$ DEFINE /EXECUTIVE_MODE /SYSTEM DCPS$_PRODUCT_NAME "HPGENERIC"

Where LPD_QUEUE_NAME is the LPD queue name to the HP Color LaserJet CP5520 Series printer.


Now use this LPD queue to print from DCPS
$ PRINT/QUEUE= FILE /PARAM=(YOUR_PARAMETERS)/NOTIFY



Please let us know if this works.


Thanks & Regards,
DCPS Engineering.
Duncan McRae
Occasional Visitor

Re: New HP printer CP5525 not supported

IT WORKS. Thank for your quick and workable response.