HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

 
public
Regular Advisor

OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

When upgrade os from 7.2-1 to 7.2-2 and tcpip
5.0 to 5.1a and eco4 ,
operator.log no messages like below:
INTERnet ACP Process creation success
INTERnet ACP FTP Accept Request from Host:
INTERnet ACP Timeout Idle FTP Server
Before upgrade os and tcpip,had these messages,And I had checked ftp service, /log_options=all.

10 REPLIES
Martin P.J. Zinser
Honored Contributor

Re: OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

Hello,

have you checked that your OPCOM process is running correctly? If not you will not see any messages (and yes, OPCOM can die if you throw enough stuff at it).

Else, please do a show service ftp/full and post the output here.

Greetings, Martin
Mobeen_1
Esteemed Contributor

Re: OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

Public,
I would suggest that you look at the following

1. As Martin suggested look if your OPCOM
is running properly.
To do this, just login and do a
REPLY/ENABLE (and watch the screen for
a while and see if any messages are
appearing)

2. Also check to see if you have turned on
AUDIT on network

regards
Mobeen
public
Regular Advisor

Re: OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

Thanks your echo.
I had catched log like attach file.
Mobeen_1
Esteemed Contributor

Re: OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

Public,
I think that is not what we were looking for. I will give you the commands below, please run that and post the output

1. Check to see if OPCOM is running

System Prompt:/>show sys/proc=*OPCOM*

2. Check what are the auditable events
System Prompt:/>show audit

regards
Mobeen
Ian Miller.
Honored Contributor

Re: OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

can you also post the result of
SHOW LOG OPC$*
____________________
Purely Personal Opinion
Martin P.J. Zinser
Honored Contributor

Re: OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

Hello Public,

the definition of the FTP service does look ok, it does match what I would expect to see. The next step really is checking if the Opcom process is running. Detailed instructions how to do this have been given in previous posts.

Greetings, Martin
李俊賢
Occasional Advisor

Re: OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

Thank's for your help!!!
I had catched log like attach file.
Martin P.J. Zinser
Honored Contributor

Re: OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

Hello,

thanks for coming back with the information. Now the last test is to do a reply/enable from an interactive session with suitable privs, initiate an FTP connection and see if you do get a message on the screen.

Actually looking around in assorted operator log files and reading the documentation I did not find the messages you report on our systems either. It might be possible the operator messages were replaced by individual log files. Have a look at SYS$SYSDEVICE:[TCPIP$FTP]TCPIP$FTP_RUN.LOG

This hopefully should contain the information you are after.

Can somebody else please confirm this on their systems?

Greetings, Martin

public
Regular Advisor

Re: OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

After my test and checked:
1 After upgrade to os and tcpip,
ftp daemon always exist,So I test ftp ,The log always not produce on operator.log(But tcpip$ftp_run log have),When
I stop process , It spawn other ftp daemon.
Again stop process , Even force ftp service
disable. Need enable ftp service.

2 Before upgrade os and tcpip, The ftp daemon will produce on first time ftp running.
It will log on operator.log at that time.
If ftp daemon exist. It will no log on operator.log,And ftp daemon will disappear
after some time.
I think it is TCPIP 5.1a normal status.

Wim Van den Wyngaert
Honored Contributor

Re: OPERATOR.LOG NO FTP LOGIN LOGOUT MESSAGES

I use VMS 7.3 with TCP 5.3 eco 2.

I don't get the messages for ftp. For the other services like rlogin it seems to work.

I get the message for the process creation only (after stop/id).

Wim
Wim