Operating System - OpenVMS
1748060 Members
5720 Online
108758 Solutions
New Discussion

Open VMS Alpha OS Versio 7.2

 
ie000143
Occasional Contributor

Open VMS Alpha OS Versio 7.2

Open VMS and SNMP
I need to change the default SNMP configuration  to have no private or public strings and I do not know the command line sequence to do this.

 

 

P.S. this thread has been moevd from Community Feedback & Suggestions to OpenVMS > Networking. - HP Forum Moderator

2 REPLIES 2
Steven Schweda
Honored Contributor

Re: Open VMS Alpha OS Versio 7.2

 
Peter Zeiszler
Trusted Contributor

Re: Open VMS Alpha OS Versio 7.2

If you have no private or public community strings, why have SNMP enabled?

 

What version of TCPIP are you running may be different for which files or locations the SNMP is located.  If you are using a different IP stack, then this won't even help any.

 

If you are on a newer version of TCPIP this should show what community strings you have setup:

tcpip show config snmp/full

type  SYS$SYSDEVICE:[TCPIP$SNMP]TCPIP$SNMP_CONF.DAT

 

If the strings are setup in the SYS$SYSDEVICE:[TCPIP$SNMP]TCPIP$SNMP_CONF.DAT file, then edit the file to remove them.

 

If the community strings are setup in the tcpip config, then you remove them via : tcpip set config snmp /nocommunity="name"