Operating System - OpenVMS
1748246 Members
3364 Online
108760 Solutions
New Discussion юеВ

Re: OpenVMS Itanium CMS upgrade...get ACCVIO after upgrade

 
Joseph Bettro
Advisor

Re: OpenVMS Itanium CMS upgrade...get ACCVIO after upgrade

Rob, where did you get the v4.5-2 kit? That leads me to believe there is a patch kit available. I sent off a note to HP asking if there was a patch kit and the response was that the ACCVIO are fixed in the DECSET128 kit...which is where I got the v4.5 kit.
Robert Atkinson
Respected Contributor

Re: OpenVMS Itanium CMS upgrade...get ACCVIO after upgrade

Hi Brad.

No, as far as I can remember, we've never had ACCVIO problems. But we've always installed the images into memory with privs, so can't say the problem hasn't been lurking.

Unless Joseph tries my INSTALL script, I guess we won't know where the problem lies. It's more likely to be code based than privilege, but you never know.

Rob.
Robert Atkinson
Respected Contributor

Re: OpenVMS Itanium CMS upgrade...get ACCVIO after upgrade

I installed 'DECSETECO1128' in April, from the 8.3-1H1 distro HP sent me.

Happy to send over a copy if you can't find it.

You should be able to get the latest software from Software Update Manager (link on the left of this page) if you have a support agreement in place for CMS.

Rob.
Joseph Bettro
Advisor

Re: OpenVMS Itanium CMS upgrade...get ACCVIO after upgrade

Ah, got it...let me try that guys and I'll let you know...
Thanks!
Brad McCusker
Respected Contributor

Re: OpenVMS Itanium CMS upgrade...get ACCVIO after upgrade

Right - looking at DECSet 12.8 ECO1, it appears to include CMS 4.5-2. It's available from the patch site.

Please do let us know if it solves your problems. I have not had the opportunity or need to test 12.8 ECO1 and am curious to know.

Brad McCusker
Software Concepts International
www.sciinc.com
Brad McCusker
Software Concepts International
Robert Atkinson
Respected Contributor

Re: OpenVMS Itanium CMS upgrade...get ACCVIO after upgrade

Just dug out the release notes from my system, and there's a few references to ACCVIO (attached).

Rob.
Robert Atkinson
Respected Contributor

Re: OpenVMS Itanium CMS upgrade...get ACCVIO after upgrade

Perhaps they fixed something else along with this :-

ID:236 - Invoking the CMS$SHOW_ACL callable interface causes an ACCVIO.
Joseph Bettro
Advisor

Re: OpenVMS Itanium CMS upgrade...get ACCVIO after upgrade

That did the trick! Thanks guys...appreciate all you help!
Joe
Joseph Bettro
Advisor

Re: OpenVMS Itanium CMS upgrade...get ACCVIO after upgrade

Not that CMS is fixed, it broke MMS...now getting, "%MMS-F-BADTARG, Specified target (FOO) does not exist in the description file.
". Tried the "$ set process/parse=extended" and the MMS "xxxx" with no luck...I am at MMS v3.8-2.