Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

Reconfigure interface on OpenVMS 7.3-2 for UCX 5.4 eco6

SOLVED
Go to solution
Luigi Bellomarino
Occasional Visitor

Reconfigure interface on OpenVMS 7.3-2 for UCX 5.4 eco6

I've just installed 2 extra nics in an Alpha running above - how do I disable configuration of old nics from UCX point of view, ie remove current settings and leave them unconfigured, the old nics are onboard, so that I can configure the news ones to be the same as the old ones. When you use TCPIP$CONFIG no option to remove configuration, and uder UCX could not find a way to do this.

Thanks in advance.

Luigi
4 REPLIES
Steven Schweda
Honored Contributor
Solution

Re: Reconfigure interface on OpenVMS 7.3-2 for UCX 5.4 eco6

TCPIP SET NOINTERFACE xxx

"TCPIP SHOW INTERFACE" to see what you have.

("TCPIP HELP SET INTERFACE".)
Karl Rohwedder
Honored Contributor

Re: Reconfigure interface on OpenVMS 7.3-2 for UCX 5.4 eco6

To make it permanent use

$ TCPIP SET CONFIGURATION NOINTERFACE

to show

$ TCPIP SHOW CONFIGURATION INTERFACE

regards Kalle
Luigi Bellomarino
Occasional Visitor

Re: Reconfigure interface on OpenVMS 7.3-2 for UCX 5.4 eco6

Thanks to all, Alphas have been configured.

Luigi
Ian Miller.
Honored Contributor

Re: Reconfigure interface on OpenVMS 7.3-2 for UCX 5.4 eco6

Luigi,
please see
http://forums1.itrc.hp.com/service/forums/helptips.do?#33
____________________
Purely Personal Opinion