Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

SOLVED
Go to solution
shiva27
Frequent Advisor

Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

Hi All,

Openvms - V8.3
I want to download SYS$ERRORLOG:ERRLOG.SYS file from VMS server to local desktop thru FTP.
So i took the backup of this file on same directory with another name and tried it ftp as
ftp A.B.C.D (ip addres)
username:xyz pass:***
ftp>bin
ftp>hash
ftp>prompt
ftp>cd "SYS$ERRORLOG"
ftp>mget ERRLOG.SYS
....................
....................
Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

Any idea why this error is coming , other logs files are able to download successfully from same server.
6 REPLIES
shiva27
Frequent Advisor

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

Forgot to add,

When i check on desktop no files downloaded.
Wim Van den Wyngaert
Honored Contributor

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

ICMP port unreachable would mean that VMS replied that you could not open the transport port (you obvious have the command port active as it prompted for the username).

A firewall blocking certain ports could also send this.

Wim
Wim
shiva27
Frequent Advisor

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

Understood , but again how can i able to pulled other logs files from same server, only these file encountering error,
this file size is 130MB.

Is there any other way to download this file on desktop, i want to send this file urgently to HP for analyzing critical issues.
marsh_1
Honored Contributor
Solution

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

hi,

if there is only one why don't you just use get not mget, back it up to another area first and get it from there.

fwiw

Wim Van den Wyngaert
Honored Contributor

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

I tried the same commands from my XP with a old FTP program (which I shouldn't have) to VMS 7.3. Mget doesn't work but get works fine.

Try ftp command "debug", ftp command "set passive on" (or whatever in your ftp).

Wim
Wim
shiva27
Frequent Advisor

Re: Replace Existing File with Temp File:ICMP port unreachable 226 Transfer complete.

Thx Mark , It's done with get option.