Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

SMC Barricade console access

 
SOLVED
Go to solution
Mike Smith_33
Super Advisor

SMC Barricade console access

Can anyone shed any light on setting up the SMC 7008ABR Broadband Router so that I can connect it and have access to my consoles. I have three of them, one for each ES47 node, connected to the WAN with all the nodes connected to each SMC router. The documentation talks about configuring this for Windows and MacIntosh. I called support but the product is no longer supported. The other support line 877-438-9111 is a paid support line and I am not sure they would even know what to do.

All help is greatly appreciated. Thanks in advance!!
4 REPLIES
Volker Halle
Honored Contributor

Re: SMC Barricade console access

Mike,

the ES47 technical documentation can be found here:

http://h18002.www1.hp.com/alphaserver/es47/es47_tech.html

There is a install/config guide for the Linksys NAT box, which may help you figure out the overall config and may help you configure the Barricade router.

Volker.
Mike Smith_33
Super Advisor

Re: SMC Barricade console access

In searching for this earlier today, I found that one and bookmarked it future reference. This afternoon, I will see if it helps. I will apply points later.
Volker Halle
Honored Contributor
Solution

Re: SMC Barricade console access

Mike,

this link looks better:

http://h18026.www1.hp.com/alphaserver/docs/install/WebHelp/common_events/connect_and_set-up_nat_box.htm

It describes setup of the SMC Barricade NAT box, complete with screen-shots and everything !

Volker.
Mike Smith_33
Super Advisor

Re: SMC Barricade console access

This page is exactly what I was looking for. Volker, my hat is off to you. Thanks!!