cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP issue

wong seng guan
Frequent Advisor

SNMP issue

Hi Guru,

I have RX2660 integrity Server which is running OpenVMS V8.3-1.

I cant monitor the Integrity Server CPU utilization via the Whatsupgold NMS but i only can view the Hard disk, Memory etc.. Do i need any MIB file from the Intergrity server to import to Whatsupgold?

Thanks in advacance

2 REPLIES
Richard Whalen
Honored Contributor

Re: SNMP issue

A MIB file would just give definitions to elements that are already present in the SNMP agent. The SNMP agent that comes with TCP/IP services provides information about TCP/IP operation (interfaces, routing, active connections), and the Host Resources MIB. The MGMAGENTS (management agents) kit can also be installed and started to provide additional information about the host, its health and monitor thresholds. The management agents includes a web server to display this information.
Wim Van den Wyngaert
Honored Contributor

Re: SNMP issue

Or may be you don't have access.

tcpip show conf snmp/fu
to see if your community has access to all (0.0.0.0).

Wim
Wim