SWXCR (KZESC) error "too many entries in the change list"

[Larry Dodd]

I changed the config of a SWXCR (KZESC)in a Alphaserver 1000A and now I get a "WARNING: Too many entries in the change list; reset the systen to flush it" at powerup. I removed 3 logical drives and added one. How do I clear this error.

[Wim Van den Wyngaert]

Temporary tables in the controller are full; the controller needs to be reset.

POwer cycle the 1000 ?

Wim

[Larry Dodd]

I have power cycled the 1000 and the error remains.

[Antoniov.]

Might be some system parameters?
AUTGEN may help you, I guess.

Antonio Vigliotti

[Lawrence Czlapinski]

Antoniov, a Raid Configuration Utility (RCU) is selected from the ARC console to change RAID configurations before VMS is booted. There are no AUTOGEN system parameters involved. Configuring the RAID Array: "You can create a maximum of 8 logical RAID drives per controller."
Unfortunately Larry's error message is not helpful.