Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

SWXCR (KZESC) error "too many entries in the change list"

Larry Dodd
Occasional Visitor

SWXCR (KZESC) error "too many entries in the change list"

I changed the config of a SWXCR (KZESC)in a Alphaserver 1000A and now I get a "WARNING: Too many entries in the change list; reset the systen to flush it" at powerup. I removed 3 logical drives and added one. How do I clear this error.
4 REPLIES
Wim Van den Wyngaert
Honored Contributor

Re: SWXCR (KZESC) error "too many entries in the change list"

Temporary tables in the controller are full; the controller needs to be reset.

POwer cycle the 1000 ?

Wim
Wim
Larry Dodd
Occasional Visitor

Re: SWXCR (KZESC) error "too many entries in the change list"

I have power cycled the 1000 and the error remains.
Antoniov.
Honored Contributor

Re: SWXCR (KZESC) error "too many entries in the change list"

Might be some system parameters?
AUTGEN may help you, I guess.

Antonio Vigliotti
Antonio Maria Vigliotti
Lawrence Czlapinski
Trusted Contributor

Re: SWXCR (KZESC) error "too many entries in the change list"

Antoniov, a Raid Configuration Utility (RCU) is selected from the ARC console to change RAID configurations before VMS is booted. There are no AUTOGEN system parameters involved. Configuring the RAID Array: "You can create a maximum of 8 logical RAID drives per controller."
Unfortunately Larry's error message is not helpful.