TCPIP hangs with FTP

[Andreas Kaempfe]

Please even check the hardware port setup if full duplex or not. Both, the switch and your system port, should have the same setup. I found this problem very often, TELNET works but FTP hangs. $ MC LANCP SHOW DEVICE /PARAMETER.

Andy.

[Antoniov.]

Hi B.
I suspect new version of TCP/IP requires some system quota greater than previous one.
Can you analyze system parameters with AUTOGEN?

Antonio Vigliotti

[comarow]

If you go to
anal/system
sho sum, and find the process
what state is it in?

[Willem Grooters]

Bert,

Have you tried to execute the compilation script directly on VMS? Since it's an upgrade of VMS and a change from UCX to TCPIP, there may be issues to cope with.
(Are you SURE you used UCX, not TCPIP in 'the old days'?)

During "hang", indeed, check the status of the REXEC process on VMS. Not just the status, also what's it doing (Which exe it's executing). It may have finished compiling and wait for input, though I would expect it to return when the compilation ends (no matter how). If there is no such process, check accounting for the proces, if it is there, it's exit status may hold a clue why.

Willem

[B. van den Dool]

The problem is solved. We did install een new RSH of WINTEL.
Problem solved.

[B. van den Dool]

I searched Internet and found DENICOMP.
They forwarded a new version of RSH.
And now they forwarded a bill.
I'ts less then 15 min. consultancy.