TCPWARE IP configure .. Please is Urgent !

[Taulant Shamo]

Hello, Please help me is Urgent !

I need to put an IP to one of myu systems

one has this configuration:
SCCRA1$ show net

Product: DECNET Node: SCCRA1 Address(es): 59.11
Product: TCPWARE Node: SCCRA1.VODAFONE.AL Address(es): 127.0.0.1 10.5
.13.97 /MASK=255.255.255.224


I need to put the IP 10.5.6.47 and dhe same mask to othes system.

Thanks

[Ian Miller. · Accepted solution]

This is not really the place for time critical problems as people answer when they have a spare moment from their 'real jobs'.

However to configure TCPWARE then
@TCPWARE:CNFNET MENU

will present you with a menu driven configuration tool.

The documentation for tcpware is online at
http://www.process.com/tcpip/tcpdocs.html

This appears to be the relevent section
http://www.process.com/tcpip/tcpware57docs/Installation/Ch03.htm#E52E33

[Peter Quodling]

Of course, if you were running HP TCPIP you might get faster responses here. Or you could ask Process Software...


q

[Geoff Bryant]

The CNFNET MENU suggestion from someone else should let you configure a new IP address.

A couple of thoughts for getting a quicker response than using this forum:

- Log a support call (though your post came on a holiday.

- Subscribe to the Info-TCPware mail list. You can send a message with SUBSCRIBE in the body to INFO-TCPWARE-REQUEST@PROCESS.COM to subscribe to the list.

[Taulant Shamo]

Thanks a lot.

Taulant