UCX 5.0A ECO2 Installation procedure.

[Andy Bustamante]

Anjan,

Before jumping into the install, what version of OpenVMS is running on the target system?

Assuming a supported operating system, the first step will be to install TCPIP 5.0A, then you'll want to install the patch. Depending on the operating system version, you may be able to load TCPIP 5.1.

The early versions of TCPIP, 5.0, 5.0A, and 5.1 really need to be patched.

[Andy Bustamante]

If this is the same systems you posted in
http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1435426 the first step will be to install TCPIP, second you'll need to install the ECO (patch). I believe TCPIP will be on the operating system CD, I don't recall if it's also present on the layered products CD.

As noted in the previous thread, ECO 3 was the last release for 5.0A.

[Steven Schweda]

> [,,,] the first step will be to install
> TCPIP, second you'll need to install the
> ECO (patch). [...]

Unless the ECO is a full product kit, in
which case, you can save some work, and
simply install the ECO kit.

[Anjan Ganguly]

The UCX upgradation is successfully completed with EC) 3 path which is available in the following link.

ftp://ftp.itrc.hp.com/openvms_patches/archived_patches/axp/7.X/v7.1/tcpip/5.1/