HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrade 6.2 1H3 to 7.3

 
SOLVED
Go to solution
Wim Van den Wyngaert
Honored Contributor

Upgrade 6.2 1H3 to 7.3

My 2nd upgrade. This time an AS1000 4/200.
Firmware CD version 5.4 was installed.

I want to preserve and the old system disk was DKA0. But when I answer DKA0: as the target disk, the upgrade shows

DKA0: is write locked

You must enter the device name for the target disk on which OpenVMS Alpha will be installed.

And it prompts again. Entering ? show dka0 Mounted alloc, wrtlck.

Whats wrong ?

Wim
Wim
4 REPLIES
Wim Van den Wyngaert
Honored Contributor

Re: Upgrade 6.2 1H3 to 7.3

Got it solved. But still an exercise for the others.

Wim
Wim
Volker Halle
Honored Contributor
Solution

Re: Upgrade 6.2 1H3 to 7.3

Wim,

DKA0: may have previously been a shadowset member ? You cannot upgrade OpenVMS on a shadowset member before first dissolving the shadowset by using MOUNT/OVER=SHADOW

Volker.
Wim Van den Wyngaert
Honored Contributor

Re: Upgrade 6.2 1H3 to 7.3

Correct Volker.
I would have expected a better error message.

Wim
Wim
Wim Van den Wyngaert
Honored Contributor

Re: Upgrade 6.2 1H3 to 7.3

Up to the next
Wim