Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

Use of WAN Device Driver with Decnet Phase V

 
Demortier
Occasional Contributor

Use of WAN Device Driver with Decnet Phase V

Hello, I try to open a port(with an IO$_CREATE) to a datalink entity set up in Decnet Phase V by NCL Commands.
The function returns 'bad parameter value'.
I don't know which parameter: P1 parameter is datalink "HDLC.HDLC-0.HDLC-0"; P2 parameter is dll$K_PROTOCOLID set to the value 0x0103 like the programm example in doc Wandd Programming.
EveryOne can help me?
My second question is about this value 0x0103 of dll$K_PROTOCOLID?
Thanks for your Help

1 REPLY 1
Volker Halle
Honored Contributor

Re: Use of WAN Device Driver with Decnet Phase V

Demortier,

could you please explain what you're trying to do ?

The value used for dll$k_protocolID seems to just be a 'number' (WORD), which must be the same on both ends of the link (sender and receiver), to allow them to communicate.

Volker.