HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

VAX ft810 ethernet mismatch between zones.

 
steave ha
Occasional Visitor

VAX ft810 ethernet mismatch between zones.

My VAX ft810 system's zone A occured fail.

So I replaced hole zone A. (include centerplane)

After changed zone A, ft810 could not synchronize.

The error message is "System ethernet mismatch between zones"

The original ethernet device address is below.

Zone A
slot 10 : 08-00-2b-e0-32-0c
slot 11 : 08-00-2b-e0-32-0d

Zone B
slot 10 : 08-00-2b-e0-32-1c
slot 11 : 08-00-2b-e0-32-1d

But after replaced Zone A.

Zone A
slot 10 : 08-00-2b-e0-29-0c
slot 11 : 08-00-2b-e0-29-0d

Zone B
slot 10 : 08-00-2b-e0-32-1c
slot 11 : 08-00-2b-e0-32-1d

I tried to command "match_zones", but the result is same.

How do I change the Ethernet address in zone A?