Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

What privilege does a user need to run a EXE on a remote node?

arun sanghvi
Occasional Advisor

What privilege does a user need to run a EXE on a remote node?

Hello

As shown below user is unable to run EXE on node ANTVX4 from VAX6.

$ run antvx4"amehta pwd"::SYS$SYSDEVICE:[PERM.SAP4G07V]SAP4G7E3
%DCL-W-ACTIMAGE, error activating image ANTVX4"amehta sesmic"::SYS$SYSDEVICE:[PE
RM.SAP4G07V]SAP4G7E3
-CLI-E-IMGNAME, image file ANTVX4"amehta password"::SYS$SYSDEVICE:[PERM.SAP4G07V
]SAP4G7E3.EXE;
-RMS-E-ACC, ACP file access failed
-SYSTEM-F-LINKEXIT, network partner exited

 

EXE  does exist and has w:RE

ANTVX4::>dir
Directory SYS$SYSDEVICE:[000000.PERM.SAP4G07V]
SAP4G7E3.EXE;1          2315/2316     24-JUN-1998 14:49:28.42  (RWED,RWED,E,RE)

EXE runs OK if I use "sysmgr" account.

 

What privilege  does user  require for user to run EXE on a remote node?

 

Thanks.

 

1 REPLY
Hein van den Heuvel
Honored Contributor

Re: What privilege does a user need to run a EXE on a remote node?

 

>> user is unable to run EXE on node ANTVX4 from VAX6.

 

Hold it right there....

 

$ run antvx4::SAP4G7E3

 

That's just a remote file spec. It is NOT a command to run something ON vx4, but FROM vx4.

It that what is intended?

One READ priv is needed for that (because it is not execution)

http://h71000.www7.hp.com/doc/73final/9996/9996pro_046.html

 

Hein.