HPE Community
Operating System - OpenVMS
1752801 Members
5674 Online
108789 Solutions
New Discussion юеВ

Re: ftp put file problem on OpenVMS

 
Paul Jerrom
Valued Contributor

тАО03-25-2009 11:18 PM

тАО03-25-2009 11:18 PM

Re: ftp put file problem on OpenVMS

Howdy,

As John says (hi John) you can use the SET command to turn on/off hi-watermarking, but I seem to remember you have to remount the disk to effect the change.

Have fun,

PJ
Have fun,

Peejay
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If it can't be done with a VT220, who needs it?
0 Kudos
цЭОф┐Кш│в
Occasional Advisor

тАО03-25-2009 11:29 PM

тАО03-25-2009 11:29 PM

Re: ftp put file problem on OpenVMS

Thank you all
I obtain many experiences about this case!
0 Kudos
Jur van der Burg
Respected Contributor

тАО03-25-2009 11:54 PM

тАО03-25-2009 11:54 PM

Re: ftp put file problem on OpenVMS

"As John says (hi John) you can use the SET command to turn on/off hi-watermarking, but I seem to remember you have to remount the disk to effect the change."

No. Changing highwater marking is immediate.

Jur.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.