HPE Community
Operating System - OpenVMS
1753781 Members
7503 Online
108799 Solutions
New Discussion

Re: printing from OpenVMS and W2003 network on same printer

 
David Jones_21
Trusted Contributor

‎12-19-2005 05:56 AM

‎12-19-2005 05:56 AM

Re: printing from OpenVMS and W2003 network on same printer

We use DCPS on VMS to talk raw TCP/IP (port 9100) to our HP printers and then use SAMBA to present the print queues to the windows domain. Using the port 9100 interface lets us get an approximation of the pages printed.
I'm looking for marbles all day long.
0 Kudos
Reply
Rudolf Wingert
Frequent Advisor

‎12-19-2005 08:55 PM

‎12-19-2005 08:55 PM

Re: printing from OpenVMS and W2003 network on same printer

Hello,
I did found this with the following actions:
select the printer, open the properties window with the right mouse button, select the TAB device settings. There you should see the output protocoll, Ctrl+D action before and after job scheduling, time limits, etc. Hope this helps.
Best regards Rudolf Wingert
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.