cancel
Showing results for 
Search instead for 
Did you mean: 

quantum i500

SOLVED
Go to solution
Madhumita Shah
Occasional Contributor

quantum i500


my boss asked me to get Alpha system connected to quantum i500 LTO4 tape library. the alpha and the tape are on same switch. we have use data protector product on all windows, unix and vms. after reboot and io auto the sancp show the drives, but the vms doesnt show any tape drives. please any suggestions.

SANCP> show wwid

| Conn Port Dev

Cred Appr | QF Cred User Current

Product ID Node WWID Port WWID | Cnt I/Os I/Os

I/Os I/Os | Seen Avl Cap QF Alg

---------------- ------------------- ------------------- + ---- ---- ----

---- ---- + ---- ---- ---- -------

ULTRIUM-TD4 5003.08C0.9C6A.F000 5003.08C0.9C6A.F001 | 0001 0000 0000

0000 0000 | 0000 8000 0000 T/5000

ULTRIUM-TD4 5003.08C0.9C6A.F004 5003.08C0.9C6A.F005 | 0001 0000 0000

0000 0000 | 0000 8000 0000 T/5000

SYMMETRIX 5006.0482.CC19.7526 5006.0482.CC19.7526 | 0001 0000 0000

0000 0000 | 0000 8000 0000 T/5000

SYMMETRIX 5006.0482.CC19.7529 5006.0482.CC19.7529 | 0001 0000 0000

0000 0000 | 0000 8000 0000 T/5000

MSA1000 5008.05F3.0010.F680 5008.05F3.0010.F681 | 0001 0000 0000

0000 0000 | 0000 8000 0000 T/5000


SANCP> Exit
3 REPLIES
Duncan Morris
Honored Contributor
Solution

Re: quantum i500

Madhumita,

have you used the MC SYSMAN IO FIND_WWID command yet?

You will find details of how to configure fibre channel tape devices in the clutsering manual:

http://h71000.www7.hp.com/doc/82FINAL/6318/6318pro_010.html#index_x_394

Regards,

Duncan
EdgarZamora_1
Respected Contributor

Re: quantum i500


Do a SYSMAN> IO FIND_WWID before you do the IO AUTO. Good luck.
Madhumita Shah
Occasional Contributor

Re: quantum i500

I must apologize for the delay but the solution worked perfectly. io find_wwid and then io auto showed the devices. thank you greatly for the pointer to the documentation. might it not be strange to be in the clustering manual?