smh collects wrong power sensors information on vms

[kai yang_1]

Hi all

I have installed smh2.0 on RX8620, OS is openVMS 8.3 , this RX8620 has 6 power sensors, but when i open the shm page(http://host:2381) and click home-> system-> power sensors, i found smh shows there are 8 power sensors(6 sensors is good, two sensors is failed) on this server, obviously it is wrong, so how can i fix this. if there are any ways i can config smh config related file on vms or any patches for this issue?

many thanks first.

[marsh_1]

hi,

are you up to date with your firmware , v5 has fixes for power supply related reporting issues, v5.1 is latest , link here :-

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=51400&swItem=pf-54856-1&prodNameId=346370&swEnvOID=2061&swLang=13&taskId=135&mode=5

hth

[sushruta]

Hi,

The problem reported is fixed now and you the patch for the same is provided in the forth coming release of SMH,

HP-I64VMS-SMHPAT-V0200-20

This is expected to be released in another couple of weeks tentatively.

Please wait for the announcement of this release.

Thanks and Regards
Sushruta C Nadig