Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

smh collects wrong power sensors information on vms

 
kai yang_1
Occasional Visitor

smh collects wrong power sensors information on vms

Hi all

I have installed smh2.0 on RX8620, OS is openVMS 8.3 , this RX8620 has 6 power sensors, but when i open the shm page(http://host:2381) and click home-> system-> power sensors, i found smh shows there are 8 power sensors(6 sensors is good, two sensors is failed) on this server, obviously it is wrong, so how can i fix this. if there are any ways i can config smh config related file on vms or any patches for this issue?

many thanks first.
2 REPLIES 2
marsh_1
Honored Contributor

Re: smh collects wrong power sensors information on vms

hi,

are you up to date with your firmware , v5 has fixes for power supply related reporting issues, v5.1 is latest , link here :-

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=51400&swItem=pf-54856-1&prodNameId=346370&swEnvOID=2061&swLang=13&taskId=135&mode=5

hth

sushruta
Occasional Visitor

Re: smh collects wrong power sensors information on vms

Hi,

The problem reported is fixed now and you the patch for the same is provided in the forth coming release of SMH,

HP-I64VMS-SMHPAT-V0200-20

This is expected to be released in another couple of weeks tentatively.

Please wait for the announcement of this release.

Thanks and Regards
Sushruta C Nadig