Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

spooler printer queue to hp 4100 printer from itanium system vms 8.31h

 
SOLVED
Go to solution
Tony Gallati
Occasional Contributor

spooler printer queue to hp 4100 printer from itanium system vms 8.31h

I have a decserver 91L+ connected through our network with a printer port defined as lta9003. I have a spooled print queue defined on the itanium system which will print a report file fine if I use a Print/queue command to the print queue. If I copy a report file to the printer with a copy command, I will get the following error and it will not spool to the printer.%COPY-E-CLOSEOUT, error closing LTA9003: as output

-RMS-E-DAC, ACP file deaccess failed during $CLOSE

-SYSTEM-F-NOTPRINTED, failed to queue spool file for print

I can access the same port off the decserver through a microvax 3100 runing vms 6.1 and the copy command works fine. I have an hp print library and form set the same on both systems, but only the mv3100 will print without error.I will get the same results if I open the port as an output device from a program application when the program closes the device. I don't know if something has changed under VMS or if there is some other configuration issue when spooling to a print queue to this type of decserver. This same decserver allows user logins for the ports configured that way without a problem off the itanium system.

4 REPLIES 4
RBrown_1
Trusted Contributor
Solution

Re: spooler printer queue to hp 4100 printer from itanium system vms 8.31h

$ show queue /full

What does it say for /PROCESSOR? It should be LATSYM.
Hoff
Honored Contributor

Re: spooler printer queue to hp 4100 printer from itanium system vms 8.31h

Try:

set device lta9003: /spool


Wim Van den Wyngaert
Honored Contributor

Re: spooler printer queue to hp 4100 printer from itanium system vms 8.31h

Spooled device full ?
Spooled to a queue that is no longer existing or the disk is not mounted ?

Wim
Wim
Hakan Zanderau ( Anders
Trusted Contributor

Re: spooler printer queue to hp 4100 printer from itanium system vms 8.31h

As already asked.....supply more detailed information.

Has it ever worked ?

Hakan

AKA "The green-capped printerguru" ;-)
Don't make it worse by guessing.........