Operating System - OpenVMS
cancel
Showing results for 
Search instead for 
Did you mean: 

vmscluster - cisco OTV - is anybody doing this?

SOLVED
Go to solution
shcts
Occasional Advisor

vmscluster - cisco OTV - is anybody doing this?

 

Hi, I'm trying to set up a cluster between members that are connected via the cisco OTV protocol, which is supposedly a layer 2 transport protocol that connects different switches together.

 

I'm trying to boot a system into the cluster, and it sees the other (already up) system, and gets into the NEW state, but it never gets any further. Is anybody already doing this? I don't think it is something with the VMS setup, I think its this networking configuration.

 

THANKS!

5 REPLIES
John Gillings
Honored Contributor

Re: vmscluster - cisco OTV - is anybody doing this?

Have you asked Cisco if OpenVMS cluster traffic is supported?

A crucible of informative mistakes
Andy Bustamante
Honored Contributor

Re: vmscluster - cisco OTV - is anybody doing this?

>>> never gets any further . . .

 

What is the votes, expected votes, and possible quorum disk configuration on each node in the cluster?  

If you don't have time to do it right, when will you have time to do it over? Reach me at first_name + "." + last_name at sysmanager net
shcts
Occasional Advisor
Solution

Re: vmscluster - cisco OTV - is anybody doing this?

 

haha got this working a while ago -- I was like, check votes, expected votes, gimme a break,  OF COURSE I checked that, ,...hey wait a minute this is wrong. Thanks Andy...:-)

shcts
Occasional Advisor

Re: vmscluster - cisco OTV - is anybody doing this?

 

yessh, I'm  such a bozo I selected my own post as the solution.

Dennis Handly
Acclaimed Contributor

Re: vmscluster - cisco OTV - is anybody doing this?

>I selected my own post as the solution.

 

Not a problem.  Under Post Options is a "Not the Solution" option.  Then you can Accept it on another post.

And most important of all, you can assign Kodos.