ADVFS : Domain domain1 not activated

[Danny Ramos_3]

hi guys,

am currently having problem mounting one of my domains. I've tried the following:

showfdmn domain1: (below is the output)

"# showfdmn domain1
ADVFS : Domain domain1 not activated - inconsistency detected
showfdmn: unable to get info for domain 'domain1'
showfdmn: error = E_DOMAIN_NOT_ACTIVATED (-1067)
#"

i tried to list the domain attributes, and found that each of the disk devices within the domain contains an advfs partition (using disklabel). unfortunately, nothing went right! i also made use of advscan to no avail.


--------------------------------------------
i'm using an old AS4100 with tru64 ver 4.0f, below is the error messages from messages prior to halting.


Apr 15 15:31:22 PROSPERO1 vmunix: ADVFS INTERNAL ERROR: dealloc_bits_page: can't clear a bit twice!
Apr 15 15:31:22 PROSPERO1 vmunix: ADVFS: dmnId = 3f3fa934.00047b7b, vd = 1, pg = 19, wd = 705, mask = 00000000
Apr 15 20:39:06 PROSPERO1 vmunix: ADVFS EXCEPTION
Apr 15 20:39:06 PROSPERO1 vmunix: Module = bs_sbm.c, Line = 330
Apr 15 20:39:06 PROSPERO1 vmunix: ADVFS INTERNAL ERROR: dealloc_bits_page: can't clear a bit twice!
Apr 15 20:39:06 PROSPERO1 vmunix:
Apr 15 20:39:06 PROSPERO1 vmunix: panic (cpu 2): ADVFS INTERNAL ERROR: dealloc_bits_page: can't clear a bit twice!
Apr 15 20:39:06 PROSPERO1 vmunix:

highly appreciate your response thanks.

danny

[Mark Poeschl_2 · Accepted solution]

Have you tried running the 'verify' or failing that the 'salvage' command against the domain? Try 'verify' first. With the '-f' flag it will attempt to fix certain types of corruptions in a domain. If 'verify' doesn't work, you may still be able to use 'salvage' to recover some or all of your data.

[Greg Yates]

Danny,

You normally get that panic because of storage problems (disk going bad, etc.). If you haven't already gotten the domain mountable) we could get you the latest fixfdmn and/or the latest version of salvage. Please log a support call if you still need help.

Thanks.
Greg