Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Operating System - Tru64 Unix
cancel
Showing results for 
Search instead for 
Did you mean: 

Changing HSV110 from SCSI-2 to SCSI-3 in Tru64

Harichand
Occasional Contributor

Changing HSV110 from SCSI-2 to SCSI-3 in Tru64

Hello,
I was trying to convert the HSV storage array from SCSI-2 to SCSI-3. How can that be done. Is SCSI-3 supported in Tru64?
Thanks in advance
1 REPLY
Hein van den Heuvel
Honored Contributor

Re: Changing HSV110 from SCSI-2 to SCSI-3 in Tru64

What System ES40? .. GS1280?
What OS version?

The HSV is a controller which is typically connected with fibre, one one side to a switch, on the other to disk trays.
Scsi-2 or Scsi-3 does not come into play.

Please explain in more detail what storage you are trying to connect and covert.
Staring at the Tru64 box.. and KZPGA connected to a siwtch with 1 or 2 gb fiber?
Which switch? The onto an MSAxxx or EVA with an HSV controller? Numbers?

Now if you change stuff 'behind' a controller, then Tru64 will never know. Go for it! Tru64 sees only the LUNs, not the DISKs.

If you do have SCSI-2/3 cables, then which interface? KGPSA? KZPCA-xx?. What cables? Old fat BN21 ? LVD ? BN31 ?

Please help us help you!
Hein